Modern Handrail Details

In this video I review the process of designing modern handrail details. I advocate an informed minimalism whereby safety and function is the priority but I quickly move beyond merely what the building codes dictate (width, tread run, riser height, guardrail and handrail conventions) into meaningful design gestures and appropriate materials. Within the necessary safety and functional constraints, the modern examples I use to illustrate the concept in the video still manage to delight the senses. Be sure to read this related post on minimal deck guards and edges which describes in detail the guardrail for the Pond House project.

Polygal - An Architect's Review

In this video I review everything you need to know about multiwall (sometimes called twinwall) structured sheet plastic. I review the cost, manufacturers (Polygal, Verolite, Thermoclear, Palram, Sunlite), light transmission, thermal properties, installation details, size, color, shapes and possible uses. As with all of my videos I review the material from the standpoint of an architect evaluating the product for potential use in home design and construction projects.

The Shed Roof - An Architect's Review

In this video I discuss the reasons for choosing a shed roof shape as well as the design implications of the choice. Sheds are structurally simple, site responsive forms that are finely tuned to passive solar collection. With opportunities for daylighting via clerestories, rainwater harvesting and other aesthetic benefits they're a great choice to meld traditional and contemporary design languages.

I like the shed form for its humble roots and its directional nature. I've designed a few projects that utilize the shed roof:

Naskeag House

House on the Neck

 

Modern Baseboard Design - 4 Ways

In this video I discuss four modern design attitudes toward the baseboard design and detailing in residential architecture. They are: no base, reveal base, flush base, and the applied base. Baseboard protects a highly trafficked (and abused) part of the home and covers the messy joint between the finished wall and floor. This collection of modern base details highlights the aesthetic language of modernism: functional, spare, humble, minimalist and expressive.

For modern baseboard details I've designed see:

Pond House

House on the Neck

Longhouse

The Dogtrot House Plan Origin Story

In this video I discuss the origins of the dogtrot as a plan archetype, its history and how it came to be. Although commonly thought of as a Southern building type early settlers of Pennsylvania and New Jersey, the Swedes and Finns brought with them the "pair cottage" from Northern Europe. This shaped the early dogtrots in the United States. It was widely adopted in the South because is offered an ingenious method of passively cooling the home. This is the first of a three-part video series. In part 2 I discuss the design process for the modern dogtrot floor plans I've developed which were inspired by these early prototypes.

Industrial Style - Metal Mesh for the Home

In this video I discuss how to put metal mesh to work in your home. I'm always searching for new materials to use in my residential work. I’m particularly drawn to adapting simple, utilitarian, industrial materials for use in the home. Industrial metal mesh is an excellent example of this and one that deserves consideration for both interior and exterior use. In the video I review the different types of mesh available from bar grating and metal fabrics to screening and wire meshes. I discuss the substrates and specific applications. Each is illustrated with images depicting their use.

Phased Construction for Residential Construction

In this video I discuss the advantages and disadvantages of phasing your home construction project. Phasing intentionally and selectively plans for and delays certain aspects of a home's construction. While it saves money up front, it usually costs more in the long-term. The advantages of phased construction are:

  1. Lower Initial Investment - it takes less overall to get started and can spread the costs of a larger project out over time.
  2. Shorter Construction Time - the smaller scope of work nets a reduced (initial) construction timeline.
  3. Experience - living in a partially completed home while its under construction not only offsets living costs but allows you to truly experience the size and scale of the home before undertaking future phases.
  4. Design Changes - phasing opens the door to pivoting design ideas over time. You may decide you don't want the detached guest house planned in phase two, rather you want it incorporated into the home as an addition.

The disadvantages are:

  1. Complexity - overall phased construction is more complex.
  2. Longer Total Construction Time - even though the initial construction sequence is shorter it will take longer to realize the entire project.
  3. Higher Total Cost - because of the longer time frames involved, financing costs, higher design fees and the extra mobilization costs, phased projects are inherently more costly to undertake.

I discuss the details of financing concerns, planning issues, sequencing, phasing plans, staging, scheduling, and living with the mess of construction.

Phasing is an overall more complex process, but it makes sense in certain cases, the video explains those cases supported with lots of visuals.

Garage Style Doors for the Home

In this video I review new ways to put the common garage door to use around your home. I review the types of garage doors: pivoting, sectional, and coiling as well as the materials, hardware options and special considerations you'll want to review before committing to using this design element in your home. The images offer proof that the overhead door doesn't have to be relegated to only the garage anymore.

Choosing Pocket Door Hardware - Pro Tips

In this video I discuss the secret to pocket doors' success - selecting the proper hardware. I discuss quality architectural hardware specifics from manufacturers like: Hafele, FSB, MWE, Halliday & Ballie, Sugatsune, Accurate and others. I review the optimal track configurations, flush pull handle sizing and shape considerations, and the all important lockable pocket door function.

Embracing the Narrow Home

The simplicity, directness and beauty of a narrow floor plan makes it suitable for many building sites, not only those on tight lots. In the video I discuss in detail twelve compelling reasons to embrace a narrow home design. If I've convinced you; be sure to check out my offering of efficiently designed, affordable, narrow home designs in the shop.

Advantages:

  • Light
  • Warmth
  • Ventilation
  • Efficiency
  • Flexibility
  • Expandability
  • Vertical Separation
  • Horizontal Separation
  • Cost Savings
  • Sense of Exploration
  • Borrowed Space
  • Diversity

Design Inspiration

For me, the beginning of a new design project brings with it, in equal measure, both excitement and fear. Fear because the quest for design inspiration is an unknown path. The idea may arrive in an hour, a day, a month or, the deep nerve of fear: never. The architect Maya Lin, perhaps best known for her Vietnam War Memorial, likened her design process -- the discovery and inspiration -- to that of laying an egg. Her egg is an idea that arrives "fully formed" and it's the result of an unknowable amount of thought, study, sculpting , sketching and writing.

I'll admit to some envy of her process. Mostly because it results in a completely fleshed out idea, ready to develop into a coherent, beautifully articulated project. I console myself with the thought that she suffers the same anxieties all designers face.

I find my own search for design inspiration as elusive today as it was when I entered architecture school in 1991. It's an unpredictable muse. What I know now, that I didn't know then is that my ideas only come as a result of sketching. Much like writing, the ideas flow from the act of putting pen (or key) to paper (or pixel). The process of sketching is one that is taught early on in school as a means of thinking. It's a way to arrive at the genesis idea that sets a project in motion. Architects call this idea a ‘parti’. From the French, Prendre parti meaning "to make a decision".

And for an architect, nothing can replicate that moment when that idea arrives.

The Problem

I use sketching to document and synthesize thoughts about the site, surrounding buildings, the client, the necessary spaces, the climate, zoning restrictions, budget - basically all of the situational factors that represent the context of the architecture. While that seems like a lot to absorb, there are always certain themes that demand more attention than others. This makes the process easier for me as I dig deeper, a natural hierarchy begins to establish itself. There are building codes, restrictions, design review boards, wetland's commissions, budget, client proclivities - these are constraints that every project confronts. The goal is to understand all of the rules for the project and then set about creatively following them. It's often these constraints that can be the genesis for an exciting work of architecture.

A new project I've been working on is an interesting case-study for how this process works.

The client brief was to replace an existing, one-story dilapidated structure and double the leasable space of the property with retail on the ground floor and a restaurant on the upper level and an apartment on the uppermost level. The small 20-foot by 80-foot lot meant that the additional square footage would require a multi-story solution. Because it's in a business district it shares a property line with a neighboring structure to one side and to the other it looks out on a parking area and an unappealing, cluttered rooftop.

Seems straightforward, right? The building next door has windows along the entire shared property line and some of them serve bedrooms. So, legally we can't build right up against the property line and obstruct the bedroom windows. Given that the lot is only 20-feet wide, sacrificing any square footage would limit the leasable area and the monthly ROI for my client. The lot is also in a downtown business district with a Design Review Board which requires buildings to fit with the established character of the neighborhood, which is, buildings constructed to the lot lines. Add to this, the fact that the lot is oriented along a north-south line means collecting southern light for an upper story restaurant will be tough. It's a tricky problem, but there's one thing that stands out above all else when I think about how I'll organize the structure, that's where I begin to focus my efforts and my search for inspiration.

The Idea

Venetian Alley
Venetian Alley

Knowing that I had to preserve the exit pathway for the upper story windows of the neighboring structure reminded me of the complex network of foot paths that predominate the walkable European city. There, alleys were usually remnants of old pedestrian streets. And, while these pathways have become ever smaller as the cities became more dense and the land more valuable, the alley has persisted because they're essential for service, access, light, and air.

It was this realization, that I could create an alley between the two structures that was the spark that led me to the organizational design solution. But, this had to be more than just an alley. To maximize its functional potential on the small lot it had to provide the circulation for both my client's building and for the neighboring structure's exit windows, entry, exit, light, air - all of the things that an alley provides we can make use of. I won't get into the legal and code implications of actually constructing an alley between buildings, as it's complicated and somewhat uninteresting - let's just say it's a good solution to a complex problem.

The alley idea is a simple organizational concept, that helps me to begin laying out the building spaces on the site. But there are other ideas that I began to explore too and those informed how the building might consciously work to affect the environment around it.

In Part II, we'll discuss the visual inspiration and see the building take shape.

The One Space You Can't Live Without

I'm convinced I was born in the wrong part of the world. Have you ever had this feeling? I love my family, don't get me wrong, it's got nothing to do with them. My parents moved from my birthplace on central Long Island in New York a few hours north - upstate - to a small town baseball fans know well, Cooperstown. It was baseball that connected the economy to the outside world drawing thousands of tourists to see heroic players inducted into its hall each August. It was farm country and when it wasn't farm country, it was snow country.

I never played baseball, and the smell of manure made me long for the trade winds of the tropics, and the searing heat of the desert, the salt air of Big Sur, and a lush, green Kyoto.

Katsura Imperial Villa
Katsura Imperial Villa

Not coincidentally, all places more temperate than upstate New York and also places where it's possible to live somewhere between inside and outside. Not fully one or the other. Something I never had a chance to do.

I'm fascinated by open air living as a human first and of course professionally as an architect. It certainly isn't a recent invention, but it's one that has been co-opted by modern architects as an instrument to connect people more fully to their surrounding environment. As a modern architect myself, now practicing in the northerly, marine climate of Maine, I can't help but drool over the imagery and apparent freedom of my colleagues practicing in more temperate climes. No need for screen doors, or tightly controlled waterproof building shells their architecture flows from inside to outside unobstructed. These structures define places for being, for living - without constraints or boundaries.

But I know as an architect too, that even though we may have black flies and mosquitos and snow - which flies for more of the year than we'd like - we still have a need for transition spaces in our architecture. Open air living isn't completely possible but these transitions can afford the suggestion and on rare days even deliver on the promise.

I would argue that transition space is the one space no work of architecture can exist without. No matter where we practice, architects follow similar rules about the need for transitions between enclosed (indoor) and unsheltered and open (outdoor) space. These buffer zones, where we move from one activity to the next are not only extremely useful, utility-driven spaces but they're integral to our comfort and our experience of a place.

Imagine stepping into the the Pantheon's cavernous dome without the large sheltering portico transition. It's not the same. The Greek's and Roman's of antiquity understood this, their architecture is rife with colonnades, porticoes, the agora, the forum - each one had a preamble. Hardly superfluous, they're necessary and comforting architectural devices.

via Campos Leckie Studio
via Campos Leckie Studio

A more contemporary example everyone is familiar with is the porch. Porches give us a place to kick off the mud from our boots, a place to sit outside while it rains or sheltered from the sun and reduce the apparent size of our two or three story homes to something more in tune with the size and shape of our bodies.

We instinctively notice the absence of transition spaces too. Think of almost any tract house in suburbia built in the last 20 years. Are you picturing arriving to a garage door? I know I was. Suburbia has asked that we eliminate the transition space in favor of our car. Step out of your car an into the four walls of your home.

Architects understand the need for transition spaces and leverage their utility. They provide a sense of scale, shelter, enclosure, protection, a sense of arrival and departure and because they lack the strict requirements of conditioned (or heated) space they can be more sculpturally free and expressive.

via Campos Leckie Studio
via Campos Leckie Studio

Modern architecture has surely sought to connect us to our place in a more direct way than its predecessors and transition spaces make this possible as evidenced by these seductive photos of a project in the desert southwest. Almost like nomadic tent structures, the architecture is reaching out to the land, buffering the extreme environment creating pools of shade around the home. This makes the interior environment more comfortable and it provides places to sit out of the intense sun for the inhabitants.

Transition space is the one space you can't live without (there just might be one other one too).

Minimal Deck Guards and Edges

I thought it would be interesting to explore the ideas at work behind the design of a guardrail for a recent project of mine. While it's one small component of the larger design it speaks to the architectural process at work. The guardrail sought to carefully balance the competing desires of an unobstructed view,  safety and of course aesthetics.

Concept

Pond House guardrail edge
Pond House guardrail edge

I always reference the building concept when designing each individual component of my buildings. The concept for this project was inspired by the fishing shacks and wharf structures of coastal Maine and resulted in a trio of cottages. Two are situated at the edge of the tidal salt pond and the third extends out over it - a modern wharf of sorts. The marine references are clear in the built-form, from the bright-work of the large sliding doors to the simple, utilitarian, expressive structural concept.

The wharf cottage contains the most public functions - the kitchen, living and dining rooms and has a large wrap around, cantilevered deck. The deck is positioned so as to welcome guests arriving and links the interior and exterior living spaces to the view to the fjord beyond. Because it's cantilevered, the deck appears to float as a thin plane above the water below.  So as I design different pieces of the architecture, I'm always cognizant of ideas about slimness, simplicity, honest expression of construction, and the influence of the watery site. I wanted to maximize the client's view to the fjord from both inside and out and of course maintain a safe gathering space - and it had to look good.

Deck Design

Before I can get to the guard design, I must design the deck. Each of the decks for the project were conceived of as thin planes floating above the landscape. To do this I created a steel channel frame at the edge of the deck. This steel channel not only references the simple steel shapes used on the docks and piers here on the coast but it also provides a very thin profile to the deck edge which was important to the design. The structural beams and foundation piers for all of the decks are set back from the edge to further enhance the hovering effect.

Guardrail Design

Guardrail section detail
Guardrail section detail

All of the effort at slimming down the deck edge profile would be lost if I were to place a substantial, meaty guardrail system on top of it. Cable rail seemed an obvious choice with references to boat rigging and its near invisible and weightless stature. But cable rail has must meet all of our code concerns too, which means we need intermediate supports. That's easy you say, every three feet add a post. True, I could've done that and probably been fine, but it would've looked ad hoc, not considered. I wanted to be sure that we had an even spacing along the length of the deckf and I also wanted it lined up with the regular module of the large sliding doors and the structural columns which are the dominant ordering system of the wharf cottage. Why? Mostly because I like lining things up, but also because the order makes sense and feels better. It allowed the corner offsets to be the same and it fits the tidy aesthetic which contrasts the disordered organic surroundings.  I'm always battling entropy - unsuccessfully I might add.

Here's where the added advantage of the channel deck edge comes into play. That allowed us to offset the vertical supports to the outside edge of the deck extending them down by the Ipe decking and welding them to tabs on the steel channel. The added bonus is that it gives over the deck edge to people rather than a guardrail system.

Is it perfect? No. It turns out that welding the vertical fins to the tabs on the steel channel at the deck edge is difficult to do when suspended over a pond. I'm not afraid to say that I'm always learning. And, I'm always humbled on job sites by the skill of the contractors that work so hard to make my drawings a reality.

Design Process - Selecting Materials

This is the third in a mini-series I've created which chronicles the design process for small project I've been working on - the design of a modern Barn Studio outbuilding.  In the first post I talk about how I developed the design concept and the second post describes the evolution of the elevations, which shapes the final appearance of the barn studio. I've recorded a video that discusses the material selection process for this small project.

Read on for the specifics not covered in the video.

Material Ideas

I can never seem to make enough room for material samples in my personal sample library. They take up more room than my physical book collection. For me, they offer inspiration and they speak to who I am as an architect. I’m driven by the process that turns these raw materials into a home. I love how they can speak about a client or a site - it’s part of the magic of architecture for me. 

Selecting materials usually comes from a larger idea about the site, the place, or a specific building reference. For this project, the material inspiration comes from the barn typology. Barns were often frugal constructions clad in whatever materials were locally available to the farmer. Historically, local sawmills would mill the trees felled from a building site into rough lumber. This was used for both the timber frame structural system as well as the exterior sheathing. Wood sheathing was an obvious material choice for the side walls.

Walls

Knowing what material we'll be using is only one aspect to consider. Will the siding be horizontal boarding, vertical tongue and groove, clapboards, shingles? What's the finish? My client requested I consider board and batten in a vertical configuration - this was their image of what a barn was. It wasn't my first choice, but it's a perfectly reasonable and appropriate aesthetic. So that was the foundation for one of the three options. I usually propose at least three options for our discussions. The first is an expected option, usually based on a specific client request. The second is an option they may not have considered at all, something unexpected. The third is usually a hybrid that combines the two - a middle ground. This way we're sure we've explored a range of possibility. There's usually a fourth that comes out of my client's feedback that hybridizes these options in ways even I hadn't expected. I love this aspect of the process.

Back to the vertical board and batten. The reason I didn't like it? The vertical scale of the barn. It's much shorter than it is long. My preference, especially for small structures, is to reinforce whatever the dominant ordering proportion is with the siding. The barn's dominant scale is its horizontal scale, it's length.

To highlight the building's horizontality, I'm proposing a horizontal tongue and groove siding up to the seven foot level. This reinforces our earlier decision to go with a shorter seven foot door and canopy height to achieve a taller, more barn-like proportion. We're tricking the eye into thinking the building is taller than it is by creating this horizontal band with blank wall above it.  Above this horizontal band would then be shingles to create a finer texture, smaller scale and let the upper portion of the structure recede - again this reinforces the scale shift we're looking to achieve.

Roof

For the roof, metal was another obvious choice - an appropriate agrarian reference, with a durable and clean aesthetic.  To me it was a better choice than wood because it has a crisp, tailored look that fits with the tight, simple geometry of the outbuilding. However, the design review committee didn't agree. It was apparently deemed too industrial for the neighborhood. So, wood shingles was a next best option, and this reinforced the decision to use shingles in the zone above the seven foot level.

Doors, Windows, Hardware, Flat Roof

For the doors and windows, hardware, and flat roof canopy element - gray metal and stainless steel. Simple, durable, utilitarian and monochromatic.

Trim

I opted to minimize the trim on the structure completely eliminating the corner trim and keeping the other profiles as narrow as possible. The siding boards are mitered at the corners and the shingles are woven allowing the horizontal lines to continue uninterrupted along all faces of the building. Window trim is minimal at only two and one-half inches wide and it will be stained to match the gray of the shingles.

Color

All siding is left to weather naturally to a gray color. We may use a bleaching oil or weathering stain to control the process ensuring it weathers evenly, but the idea is to minimize any maintenance. Low maintenance is a hallmark of the barn typology.

Site Elements

The main house siding is partially clad in stone and the property has a number of dry-laid stone walls as well. It was the inspiration for the long dry-laid retaining wall to the north edge and it fits well with our neutral gray palette.

So this is the basic process by which I go about selecting the materials. It's informed by a number of factors but there's an overriding logic to the decisions. They're decisions made with intent to achieve certain effects. Decisions drawn not only from an idea about what a barn should be clad in, but also from the proportion and size of the building. We look to the architecture to help us make decisions about the right solution.

I hope you'll continue to follow the process as we move forward with the next steps designing the Barn Studio. We'll discuss lighting and the interior materials in a future post. If you’d like your very own Barn Studio it's available for download. And, there are a few other variations I'd gladly share if you're interested, just drop me a line and let me know.

Design Process - The Elevations

This is the second in a mini-series I've created which chronicles the design process for small project I've been working on - the design of a modern Barn Studio outbuilding. If you haven't watched the first video where I talk about the design concept and how the floor plan was conceived be sure to check that out first. I've chosen this project to use as an example because it's so simple. For an average 2,200 square foot house the back and forth developing floor plans, the site plan, and the elevations typically takes quite a while - several weeks is average. But because the program (the number and types of spaces) isn't overly complex and the structure isn't very large it's the ideal candidate to describe my process. I've recorded a video that summarizes the evolution of the elevation options presented to my client.

https://youtu.be/6Sxg1r8MnVE

Having developed the concept and designed a series of working floor plan options around that concept my next step was to submit it to my client for their review and comment. Our dialogue revealed the things that were working and the things that weren't working about each of the concepts. I request that my clients are honest and upfront about likes and dislikes, I have a thick skin and my goal is to design a structure that meets their needs - not mine. Iteration and revision is fundamental to the design process. I sketch, design, draw, erase, redraw, submit for review and iterate again. While this back and forth was abbreviated because of the scale of the structure and the limited number of decisions to be made, larger projects can take quite a while to finalize the plans. In every project I'm in a constant state of revision and reevaluation. If I find an opportunity to make something better along the way, even when I'm much further into the design process, I do encourage the revisiting of prior decisions when better alternatives present themselves.

My client had some really useful feedback which I then incorporated into the plans in preparation for the next steps. For me, that step, is to define exactly what the exterior of the building is going to look like. This means materials, proportions of walls, windows, doors, lighting, roof shapes - everything that makes up the exterior look and feel of a structure.

Read on for a few of the insights that didn't make their way into the video.

Proportions

The first and most basic step when designing the exterior elevations is to develop an initial proportion. There are two things that inform my decisions on this project, the primary one is the barn concept. In the end, the structure must appear barn-like. The second is the size relative to the existing structures on the property. We could easily overpower the main home if we were to borrow from typical barn eave heights which can be quite tall. Because this is a residential neighborhood, I need to be sensitive to a residential scale. The existing home's walls have a 10' plate, which seems like a reasonable starting point for this building. I'll draw that as the wall height on the eaves to get started and revise it up or down later as needed. The actual proportion of the wall can appear different depending on the size opening I place in it. The video describes this concept in more detail, it's an interesting visual trick.

The other proportional exercise will be the roof shape and pitch. I'll be matching the existing house's roof pitch at 12:12 - which means for every 12" in horizontal run, the roof rises 12"; a 45 degree pitch. Orienting the roof along the length of the structure allows me to maintain a minimal profile facing the street and it orients the pitched roof to work with the short span of the building. At 14' wide, we'll have no trouble purchasing simple trusses to structure the roof.

I sketch out the basic shape as an extruded gable and begin thinking about openings next.

Barn Studio Exterior ElevationsDoors

Again we revisit the barn concept when thinking about doors. A standard door will be fine for accessing the side of the structure closest to the pool but the doors flanking the studio space should be large. My client and I have shared the initial image of large sliding barn doors on the exterior of the building to signify 'barn'. I've developed a flat canopy as a modern way of concealing the track required for these sliding panels and you'll notice that it wraps the corner and turns into a deeper overhang at the side door. This keeps the weather out and marks that area an an entry zone. Architects are always looking for ways to tell the story of how to use a building without words - overhangs communicate entry.

Large sliding barn door panels are relatively inexpensive, large sliding glass doors are, by contrast, not. I developed five different door options for my client to review using differing configurations of sliding doors ranging from the relatively expensive to the extremely expensive. The trick with these doors is find the balance between a convenient size, function, and cost.  Sliding doors make sense because the space is narrow and taking up any of the floor space with a swinging door just didn't make sense.

Barn Studio Transparent View

I first tried using French sliders, basically a 4 panel sliding door unit with two center panels that slide to either side. Standard sizes limit their cost, but also limit the overall opening. In my case the overall opening in the studio wall I was looking to fill was 24'. So, I placed two 12' units side by side using a total of four of the standard 3' wide panels. The two center panels slide to provide a 6' center opening. This didn't seem barn-like enough to me. So, among other less successful options, I transitioned manufacturers and embraced a more commercial system without the same limitations. The commercial system would allow me a 12' wide unit and 6' of that would be operable. If I put two side by side, that would leave me with a center opening of 12' in width. Much more barn-like, see what you think.

Windows

There are limited options for openings in this project, I'm recommending the bulk of the money be put toward large doors. But we'll need some windows for light, balance and ventilation. Usually with windows I start by envisioning the desired quality of each space they're looking to serve. Does the space require a large window or a small one, does it need privacy, or should it feel connected to the outdoors? I then go about sketching an underlying ordering system which they'll fit into.

In this case, the two spaces that absolutely required windows were the bath and the studio space. Since the studio had more light requirements I started there. The project is sited near the northern edge of their property with the long studio flank facing any future development. This immediately suggested a clerestory window configuration as it preserves privacy while still letting light in. Clerestory windows because they're positioned higher in the wall also permit light deeper into the space. This line of reasoning translates nicely to the bath space as well where privacy is paramount to views out. I developed a repetitive ordered system of clerestory windows to the north aligning them with the openings on the south wall as a starting point.

One last window detail to think about was the addition of a couple of small windows. You'll often see barns utilize either very small openings, or very large openings. The large openings were for letting in large equipment, the small for ventilation and light. They seemed even smaller than they actually were because they were usually placed in large blank walls. I added one on each gable as a reference to the barn aesthetic even though they'll contribute relatively little light to the overall space.

Materials

In the next post, I'll describe the process for selecting the material palette and what we have planned.

Please continue to follow the process as we move forward with the next steps designing the Barn Studio. If you’d like your very own Barn Studio it's now available for download.  I would happily share some of the interesting variants I've been developing just drop me a line and let me know.

Natural Wood Siding Minus the Maintenance

Architects, designers and homeowners go to great lengths to keep the weather out of buildings, a worthy and necessary goal. But the task of creating home exteriors that resist weather’s effects — including washing, sanding, stripping and refinishing — is significant, time consuming and expensive. Rejecting this unending cycle of maintenance and accepting weathering as part of a home’s design aesthetic makes good environmental, economic and design sense. The homes in this video embrace weathering as part of their aesthetic — and even celebrate it.